The peristaltic micropumps warrant small flow rates for various liquids and gases in diverse microfluidic applications. Their small footprint enables their direct integration in any fluid and gas supply system. Since the pumped media is only in contact with a medical grade silicon tube, the CPP1 peristaltic micropumps enable biocompatible media streams in microfluidic systems.

Benefits & Characteristics:

  • Stable and reproducible pumping of various fluids and gases
  • Only medical grade leak free silicone tubing in contact with the media
  • Bidirectional pumping with pump rates from 150 nl/min to 1700 µl/min. (depending on pump type)
  • Miniaturized form factor enabling the integration into arrays and complex microfluidic devices
  • More than 1000 operating hours at 50 µl/min (depending on pump type)
  • Separation of the inlet/outlet for pressures up to 2 bar. Always closed in the switched-off state
  • Low-cost solution for precision handling of fluids and gases for microfluidic systems

Circular Peristaltic Micropump CPP1 for very low pump rates in fluids and gases (150 nl/min – 180 µl/min)

Circular Peristaltic Micropump CPP1 for high pump rates in fluids and gases (70 – 800 µl/min)

Evaluation Kits

There are two evaluation kits available to control either 2 to 4 pumps simultaneously. They work plug and play (USB powered) with computers running Windows 10 OS. Part of the evaluation kits is a graphical user interface to control up to 4 pumps. Timing, pump speed and direction can be set and saved/loaded as multi-step routines. The GUI as well as the driver are available as Open-Source Code. Additionally, the evaluation kits can be interfaced by command line inputs and therefore can be integrated in any common coding language. Don’t hesitate to contact us for further information.

EvaKit2 – CPP1 Evaluation Kit for 2 pumps (driver)

CPP1 mounted on microfluidic ChipShop´s handling frame

Product Code
Description
Price per Piece
Order Form

10001718

Jobst Technologies CPP1 Beginner Kit for 2 Pumps

(very low/low flow rates)

Consisting of:
– 2x CCP1 180-ZM pumps
– 1x EvaKit2 pump driver for 2 pumps
– 2x CPP1 micro pump holder
– 1x Two Male-Male connectors with 50 cm silicone tube extension

582.00€

10001720

Jobst Technologies CPP1 Beginner Kit for 2 Pumps

(very high/low flow rates)

Consisting of:
– 2x CCP1 1000-ZM pumps
– 1x EvaKit2 pump driver for 2 pumps
– 2x CPP1 micro pump holder
– 1x Two Male-Male connectors with 50 cm silicone tube extension

582.00€

10001721

Jobst Technologies CPP1 Advanced Kit for 4 Pumps

(very low/low flow rates)

Consisting of:
– 4x CCP1 180-ZM pumps
– 1x EvaKit4 pump driver for 4 pumps
– 4x CPP1 micro pump holder
– 2x Two Male-Male connectors with 50 cm silicone tube extension

1020.00€